Introdução

This guide outlines how to remove the battery connector from the device.

Peças

Não são necessárias peças.

With the back of the device facing you, press down on the button while sliding the battery casing away from the speaker to remove it.
  • With the back of the device facing you, press down on the button while sliding the battery casing away from the speaker to remove it.

Adicionar comentário

Use a plastic opening tool or fingernails to unclip the two hinges of the speaker covering and remove it.
  • Use a plastic opening tool or fingernails to unclip the two hinges of the speaker covering and remove it.

Adicionar comentário

Remove the battery by pushing against it from the right and then pulling towards you.
  • Remove the battery by pushing against it from the right and then pulling towards you.

Adicionar comentário

Remove the four screws indicated in the picture with a #T6 Torx Bit screwdriver and set them aside.
  • Remove the four screws indicated in the picture with a #T6 Torx Bit screwdriver and set them aside.

Adicionar comentário

Use a plastic opening tool or your fingernails to remove the plastic backing. Start with the seam indicated in the picture and slide the plastic opening tool until the case is seperated. Start with the seam indicated in the picture and slide the plastic opening tool until the case is seperated.
  • Use a plastic opening tool or your fingernails to remove the plastic backing.

  • Start with the seam indicated in the picture and slide the plastic opening tool until the case is seperated.

Adicionar comentário

Unscrew the four screws indicated in the picture with #T6 Torx Bit screwdriver.
  • Unscrew the four screws indicated in the picture with #T6 Torx Bit screwdriver.

  • Place the four screws released from the phone in a plastic bag.

Adicionar comentário

The black battery casing and logic board can now be separated for the following steps.
  • The black battery casing and logic board can now be separated for the following steps.

Adicionar comentário

With the speaker facing you, place your fingers on the gold battery connector.
  • With the speaker facing you, place your fingers on the gold battery connector.

  • Pull upwards and release the battery connector from the black body piece.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

kelogan

Member since: 04-11-2009

1 reputação

2 Guides authored

Equipe

Cal Poly, Team 9-17, Regan Fall 2009 Membro de Cal Poly, Team 9-17, Regan Fall 2009

CPSU-REGAN-F09S9G17

4 Membros

7 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Todo: 3,161