Peças

Não são necessárias peças.

  1. Remove battery cover and battery on the back of the device.
    • Remove battery cover and battery on the back of the device.

    Adicionar comentário

  2. Using a plastic opening tool, remove the bottom cover.
    • Using a plastic opening tool, remove the bottom cover.

    Adicionar comentário

    • This will reveal 6 screws on the back, remove the screws and be careful not to lose them.

    Adicionar comentário

    • Remove the rear cover of the device.

    Adicionar comentário

    • Remove the motherboard part of the phone from the last piece of case by releasing the black tabs on both sides.

    Adicionar comentário

    • Detach the ribbon cable on the front of the motherboard.

    Adicionar comentário

    • Remove the screen to keep it from being damaged.

    Adicionar comentário

    • Detach the antenna wire at all 3 locations.

    Adicionar comentário

    • Tilt the motherboard up and detach both ribbon connections.

    • Remove the motherboard.

    Adicionar comentário

    • Replace the entire center piece of the case to replace the antenna.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Johnny Tran

Member since: 10-09-2011

473 reputação

4 Guides authored

Equipe

Cuesta, Team 1-3, Zipperian Fall 2011 Membro de Cuesta, Team 1-3, Zipperian Fall 2011

CUESTA-ZIPPERIAN-F11S1G3

3 Membros

8 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Todo: 5,569