Conserte seus objetos Comunidade Loja

BlackBerry 7510 Logic Board Replacement

Introdução

This is a guide on how to replace the logic board on your Blackberry 7510.

O que você precisa

  1. BlackBerry 7510 Logic Board Replacement, Back Face of Phone: passo 1, imagem 1 %32

    • Remove the battery cover and battery before continuing.

    • Remove the six T6 Torx screws on the back of the phone.

    • Make sure to keep the screws somewhere that they will not get lost.

    Editar

  2. BlackBerry 7510 Logic Board Replacement: passo 2, imagem 1 %32

    • Using your finger nail or a spudger, carefully pry up the back cover.

    • Begin in one spot and slowly circle around the device as you pry up all of the back cover.

    Editar

  3. BlackBerry 7510 Logic Board Replacement: passo 3, imagem 1 %32

    • Lift off the back cover.

    Editar

  4. BlackBerry 7510 Logic Board Replacement: passo 4, imagem 1 %32

    • Remove the two T6 screws.

    Editar

  6. BlackBerry 7510 Logic Board Replacement: passo 5, imagem 1 %32 BlackBerry 7510 Logic Board Replacement: passo 5, imagem 2 %32

    • Remove the daughterboard.

    • Remove the exposed vibration motor.

    Editar

  7. BlackBerry 7510 Logic Board Replacement, Logic Board: passo 6, imagem 1 %32

    • Using the T6 Torx screwdriver, remove the top screw.

    Editar

  8. BlackBerry 7510 Logic Board Replacement: passo 7, imagem 1 %32

    • Using your spudger, carefully pry off back plate.

    • Use the same technique as with the plastic back cover. Circle around the back plate until all of it is pried up.

    Editar

  9. BlackBerry 7510 Logic Board Replacement: passo 8, imagem 1 %32

    • Remove the front cover and keypad.

    Editar

  10. BlackBerry 7510 Logic Board Replacement: passo 9, imagem 1 %32

    • Remove one T6 Torx screw in the front bottom right of the board.

    Editar

  11. BlackBerry 7510 Logic Board Replacement: passo 10, imagem 1 %32 BlackBerry 7510 Logic Board Replacement: passo 10, imagem 2 %32

    • Carefully pry the screen from the board with your spudger.

    • After prying it up, remove the screen from the board.

    Editar

  12. BlackBerry 7510 Logic Board Replacement: passo 11, imagem 1 %32 BlackBerry 7510 Logic Board Replacement: passo 11, imagem 2 %32

    • Unscrew center T6 Torx screw in the center of the logic board.

    • Remove the logic board from the phone.

    • Replace with new logic board.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 8 outros contribuidores

Neil Johnson

Membro desde: 01/24/10

12 Reputação

Autoria de 6 guias

Emblemas: 7

+4 outros emblemas

Equipe

Cal Poly, Team 14-44, Regan Winter 2010 Membro de Cal Poly, Team 14-44, Regan Winter 2010

CPSU-REGAN-W10S14G44

Membros da 4

Autoria de 8 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 4

Duração total: 1,850