Introdução

This guide demonstrates how to remove and replace the LCD screen.

Peças

Não são necessárias peças.

Remove the battery cover and battery before continuing.
  • Remove the battery cover and battery before continuing.

  • Remove the six T6 Torx screws on the back of the phone.

  • Make sure to keep the screws somewhere that they will not get lost.

Adicionar comentário

Using your finger nail or a spudger, carefully pry up the back cover.
  • Using your finger nail or a spudger, carefully pry up the back cover.

  • Begin in one spot and slowly circle around the device as you pry up all of the back cover.

Adicionar comentário

  • Lift off the back cover.

Adicionar comentário

  • Remove the two T6 screws.

Adicionar comentário

  • Remove the daughterboard.

  • Remove the exposed vibration motor.

Adicionar comentário

  • Unscrew the screw holding the back plate.

Adicionar comentário

  • Carefully pry off front cover. Make sure the plastic clips are unlatched before applying force.

  • Lift off front cover from metal plate.

Adicionar comentário

  • Pry off the LCD screen with spudger at the two clips.

Adicionar comentário

  • Remove the LCD screen and replace it with a new one.

  • Careful not to rip the LCD ribbon.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Neil Johnson

Member since: 24-01-2010

12 reputação

6 Guides authored

Equipe

Cal Poly, Team 14-44, Regan Winter 2010 Membro de Cal Poly, Team 14-44, Regan Winter 2010

CPSU-REGAN-W10S14G44

4 Membros

8 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 2,499