Conserte seus objetos Comunidade Loja

Black and Decker LDX 120C Gear Replacement

Introdução

If the drill isn't working effectively it might be because of the gears, so this guide will show a step by step process on how to access the gear and to change necessary components.

O que você precisa

  1. Black and Decker LDX 120C Gear Replacement, Outer Case: passo 1, imagem 1 %32

    • For this guide we will need to use a 1.0 mm phillips #1 screw.

    • There are a total of thirteen screws that need to be removed in order to open the drill and access the interior components.

    Editar

  2. Black and Decker LDX 120C Gear Replacement: passo 2, imagem 1 %32

    • Remove the four screws on the back top side of the drill.

    Editar

  3. Black and Decker LDX 120C Gear Replacement: passo 3, imagem 1 %32

    • Remove the four screws that connect the chuck to the drill.

    Editar

  4. Black and Decker LDX 120C Gear Replacement: passo 4, imagem 1 %32

    • Remove the five screws on the front side of the drill.

    Editar

  5. Black and Decker LDX 120C Gear Replacement: passo 5, imagem 1 %32

    • Gently grab both sides of the drill casing, and separate both sides from each other.

    Editar

  6. Black and Decker LDX 120C Gear Replacement: passo 6, imagem 1 %32

    • At this point you should be able to separate both as illustrated.

    Editar

  8. Black and Decker LDX 120C Gear Replacement: passo 7, imagem 1 %32

    • Now all the components of the drill are visible and can be accessed.

    Editar

  9. Black and Decker LDX 120C Gear Replacement, Gear: passo 8, imagem 1 %32

    • After following the prerequisite guide you will be able to access the interior components of the drill.

    Editar

  10. Black and Decker LDX 120C Gear Replacement: passo 9, imagem 1 %32

    • Gently remove the top part (motor and chuck) from the rest of the drill.

    Editar

  11. Black and Decker LDX 120C Gear Replacement: passo 10, imagem 1 %32

    • Make sure you do that with care so that the connection doesn't get damaged.

    Editar

  12. Black and Decker LDX 120C Gear Replacement: passo 11, imagem 1 %32

    • To be able to get into the gears you will need to separate the motor from the rest.

    • And then you will be able to access the gears which is located between the motor and the chuck.

    Editar

  13. Black and Decker LDX 120C Gear Replacement: passo 12, imagem 1 %32

    • Twist the gauge to change between the gear.

    • If you don't hear a clicking sound then check the gears.

    Editar

  14. Black and Decker LDX 120C Gear Replacement: passo 13, imagem 1 %32

    • Twist the gear and see if the three gears rotate without jamming.

    Editar

  15. Black and Decker LDX 120C Gear Replacement: passo 14, imagem 1 %32

    • Check if any gear is chipped or broken in any way.

    • If it is then you will need to change the broken gear.

    Editar

  16. Black and Decker LDX 120C Gear Replacement: passo 15, imagem 1 %32

    • Using the spudger place it under the gear as illustrated.

    Editar

  17. Black and Decker LDX 120C Gear Replacement: passo 16, imagem 1 %32

    • The gear will remove with just a little amount of force.

    Editar

  18. Black and Decker LDX 120C Gear Replacement: passo 17, imagem 1 %32

    • The gear has been removed and now can be replaced by another gear.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 1 outro contribuidor

jeffrey zakka

Membro desde: 02/09/16

735 Reputação

Autoria de 6 guias

Emblemas: 14

+11 outros emblemas

Equipe

USF Tampa, Team 11-5, Cheng Spring 2016 Membro de USF Tampa, Team 11-5, Cheng Spring 2016

USFT-CHENG-S16S11G5

Membros da 5

Autoria de 6 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 17

Duração total: 1,954