Conserte seus objetos Comunidade Loja

Black and Decker JS660 Power Cord Replacement

Introdução

This guide shows the owner how to replace the power cord on their jig saw if it is cut or damaged. It is a very common way to render the saw useless. luckily the fix is quite easy.

O que você precisa

  1. Black and Decker JS660 Power Cord Replacement, Housing Disassembly: passo 1, imagem 1 %32 Black and Decker JS660 Power Cord Replacement, Housing Disassembly: passo 1, imagem 2 %32

    • Remove the nine torx 15.875mm screws on the front of the jigsaw using a T-15 torx screwdriver.

    Editar

  2. Black and Decker JS660 Power Cord Replacement: passo 2, imagem 1 %32

    • By separating the two housing halves, carefully remove the top plate.

    Editar

  4. Black and Decker JS660 Power Cord Replacement, Power Cord: passo 3, imagem 1 %32

    • Remove the two 12.7mm phillips head screws holding the power cord in place with a PH2 Phillips head screwdriver.

    Editar

  5. Black and Decker JS660 Power Cord Replacement: passo 4, imagem 1 %32

    • Remove the two 6.35mm flat head screws on the trigger with a 2.5 flat head screwdriver to disconnect the white and black cords.

    Editar

  6. Black and Decker JS660 Power Cord Replacement: passo 5, imagem 1 %32

    • Gently remove the black and white cord from the trigger assembly.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Autor(a)

com 4 outros contribuidores

matt murray

Membro desde: 01/27/17

682 Reputação

Autoria de 6 guias

Emblemas: 11

+8 outros emblemas

Equipe

Cal Poly, Team 22-9, Maness Winter 2017 Membro de Cal Poly, Team 22-9, Maness Winter 2017

CPSU-MANESS-W17S22G9

Membros da 4

Autoria de 7 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 4

Duração total: 765