Conserte seus objetos Comunidade Loja

Black and Decker JS660 Blade Holder Replacement

Introdução

The jigsaw blade may become loose or is not fastening correctly when using the blade. This guide will identify the problem and show the user how to fix and interchange the holder.

O que você precisa

  1. Black and Decker JS660 Blade Holder Replacement, Base: passo 1, imagem 1 %32 Black and Decker JS660 Blade Holder Replacement, Base: passo 1, imagem 2 %32

    • Unscrew the eight screws to open up the jigsaw.

    Editar

  2. Black and Decker JS660 Blade Holder Replacement: passo 2, imagem 1 %32

    • Use a screwdriver to remove the first screws securing the base to the jigsaw.

    • Remove the second screw.

    • Remove the base of the jigsaw.

    Editar

  4. Black and Decker JS660 Blade Holder Replacement: passo 3, imagem 1 %32 Black and Decker JS660 Blade Holder Replacement: passo 3, imagem 2 %32

    • With the old jigsaw base off, replace it with the new base by following the steps in the reverse order.

    • Assemble the base on a steady surface.

    Editar

  5. Black and Decker JS660 Blade Holder Replacement, Blade Holder: passo 4, imagem 1 %32 Black and Decker JS660 Blade Holder Replacement, Blade Holder: passo 4, imagem 2 %32

    • You will need to take out the entire blade clamp shown.

    • The plastic part is fragile, easy to break

    Editar

  6. Black and Decker JS660 Blade Holder Replacement: passo 5, imagem 1 %32 Black and Decker JS660 Blade Holder Replacement: passo 5, imagem 2 %32 Black and Decker JS660 Blade Holder Replacement: passo 5, imagem 3 %32

    • Showing the entire blade clamp removed from the device.

    • Apply some oil grease if dry/needed

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Autor(a)

com 4 outros contribuidores

Andrew Khouri

Membro desde: 02/08/16

468 Reputação

Autoria de 4 guias

Emblemas: 11

+8 outros emblemas

Equipe

USF Tampa, Team 6-2, Eyestone Spring 2016 Membro de USF Tampa, Team 6-2, Eyestone Spring 2016

USFT-EYESTONE-S16S6G2

Membros da 4

Autoria de 4 guias

Um comentário

What a great website… I could never have known how to replace the blade holder… Or that I could get the correct parts…I got the replacement part. Then removed the old one, and replaced the new one. NO problem at all.. Thanks to Andrew and this website… With out it, would have to pay some one at a big price, and wait to have it fixed, as would have to send it off for the repair.. Or….. Just throw it away…

Thanks every one… I will share this site for sure…

navy1aedon - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 5

Duração total: 3,389