Conserte seus objetos Comunidade Loja

Black and Decker DustBuster 15.6V Nozzle Brush Replacement

Introdução

The nozzle brush located on the end of shaft may break off during the cleaning process. Replacing the brush is as easy as breaking it off.

O que você precisa

  1. Black and Decker DustBuster 15.6V Nozzle Brush Replacement, Nozzle Brush: passo 1, imagem 1 %32

    • Lift Nozzle Brush until it clicks into fully erect position.

    Editar

  2. Black and Decker DustBuster 15.6V Nozzle Brush Replacement: passo 2, imagem 1 %32

    • Apply a gentle, equal pressure outward, to the inside of both brush legs.

    Editar

  4. Black and Decker DustBuster 15.6V Nozzle Brush Replacement: passo 3, imagem 1 %32

    • Remove one of the leg prongs from the hole it is inserted into.

    Editar

  5. Black and Decker DustBuster 15.6V Nozzle Brush Replacement: passo 4, imagem 1 %32

    • Rotate the free leg forwards or backwards from the hole.

    • This relieves the pressure from the inside of the legs allowing you to freely remove the last leg from its hole.

    Editar

  6. Black and Decker DustBuster 15.6V Nozzle Brush Replacement: passo 5, imagem 1 %32

    • Check each leg hole for debris and clear whats needed.

    • Insert a leg of the new brush into the correct hole, so the brush will click into its erect position.

    • Slide the other leg into its respective hole.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 1 outro contribuidor

Jacob

Membro desde: 03/15/17

101 Reputação

Autoria de 1 guia

Emblemas: 2

Equipe

UMass Dartmouth, Team S6-G1, Isaacson Spring 2017 Membro de UMass Dartmouth, Team S6-G1, Isaacson Spring 2017

UMASSD-ISAACSON-S17S6G1

Membros da 4

Autoria de 9 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 4

Últimos 7 dias: 5

Últimos 30 dias: 13

Duração total: 329