Pular para o conteúdo principal

Introdução

This installation guide will help you separate the blades from the blender jar. Once separated, you can successfully install replacements blades or to check for any malfunctions with the blades.

  1. Make sure the blender is turned off and unplugged from all power.
    • Make sure the blender is turned off and unplugged from all power.

    • Remove the glass jar from the base of the blender.

  2. Remove the top lid from the blender jar.
    • Remove the top lid from the blender jar.

  3. iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    Comprar agora

    iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    Comprar agora
  4. Twist the plastic base of the jar counterclockwise to remove it from the glass upper half.
    • Twist the plastic base of the jar counterclockwise to remove it from the glass upper half.

    • Take care not to cut yourself on the blades.

  5. Lift the rubber washer straight up to remove it from the blade assembly.
    • Lift the rubber washer straight up to remove it from the blade assembly.

    • Take care not to cut yourself on the blades.

  6. Lift the blades from the bottom cap.
    • Lift the blades from the bottom cap.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Andrew

Membro desde: 04-10-2012

170 reputação

4 Guias de autoria

Equipe

Cal Poly, Team 6-34, Regan Fall 2012 Membro de Cal Poly, Team 6-34, Regan Fall 2012

CPSU-REGAN-F12S6G34

4 Membros

6 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 5

Últimos 30 dias: 36

Todo: 3,354