Ir para o conteúdo principal

Black and Decker BDH9600CHV Power Switch Replacement

O que você precisa

  1. Black and Decker BDH9600CHV Power Switch Replacement, Power Switch: passo 1, imagem 1 %32 Black and Decker BDH9600CHV Power Switch Replacement, Power Switch: passo 1, imagem 2 %32 Black and Decker BDH9600CHV Power Switch Replacement, Power Switch: passo 1, imagem 3 %32
    • To remove the filter and housing, press the green button labeled "Filter".

  2. Black and Decker BDH9600CHV Power Switch Replacement: passo 2, imagem 1 %32
    • Unscrew and remove all 5 screws using the Phillips 0 screw bit. Each screw is 17.5 mm long.

  3. Black and Decker BDH9600CHV Power Switch Replacement: passo 3, imagem 1 %32 Black and Decker BDH9600CHV Power Switch Replacement: passo 3, imagem 2 %32
    • Pull the housing apart.

    • When you pull the housing apart, pieces may fall out. Be sure to track of the parts and where they go.

    • Remove the switch by pulling it out.

  4. Black and Decker BDH9600CHV Power Switch Replacement: passo 4, imagem 1 %32 Black and Decker BDH9600CHV Power Switch Replacement: passo 4, imagem 2 %32
    • Replace the new switch by sliding the replacement switch onto the top of the switch mechanism located on the motor.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Ivette Muzquiz

Membro desde: 11/06/17

349 Reputação

Autoria de 3 guias

Equipe

IUPUI, Team S1-G4, Harley Fall 2017 Membro de IUPUI, Team S1-G4, Harley Fall 2017

IUPUI-HARLEY-F17S1G4

Membros da 3

Autoria de 3 guias

Um comentário

My switch with up & down button box like

Fernando Palacios - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 11

Duração total: 1,127