Introdução

This guide explains how to replace the release button if it is broken or not working.

Press the release button while pulling up on the head of the vacuum to remove the head. Press the release button while pulling up on the head of the vacuum to remove the head.
  • Press the release button while pulling up on the head of the vacuum to remove the head.

Adicionar comentário

Using  a Phillips head screwdriver, unscrew the four screws holding the panel to the shaft of the vacuum.
  • Using a Phillips head screwdriver, unscrew the four screws holding the panel to the shaft of the vacuum.

Adicionar comentário

Pry the panel up using a spudger and pull up firmly just enough to see the clips of wire on the sides. Pry the panel up using a spudger and pull up firmly just enough to see the clips of wire on the sides.
  • Pry the panel up using a spudger and pull up firmly just enough to see the clips of wire on the sides.

Adicionar comentário

Remove the wire clips on both sides of the shaft.
  • Remove the wire clips on both sides of the shaft.

Adicionar comentário

Pull the top piece out of the shaft.
  • Pull the top piece out of the shaft.

Adicionar comentário

Pinch the two pairs of plastic catches (circled in the picture) to release the button. Pinch the two pairs of plastic catches (circled in the picture) to release the button. Pinch the two pairs of plastic catches (circled in the picture) to release the button.
  • Pinch the two pairs of plastic catches (circled in the picture) to release the button.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Khanh Fleshman

Member since: 28-01-2018

133 reputação

Autoria de 1 guia

Equipe

CPSU-BANGHART-W18S21G2 Membro de CPSU-BANGHART-W18S21G2

Community

1 Membro

1 Guide authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 5

Todo: 23