Introdução

The vacuum comes with three hose attachments. To clean or remove blockages from hose attachments, it may be necessary to remove the hose and wand attachments.

Place the vacuum upright and locate the nozzle attachment you want removed.
  • Place the vacuum upright and locate the nozzle attachment you want removed.

Adicionar comentário

Slide the attachment off of the end of the wand. Slide the attachment off of the end of the wand.
  • Slide the attachment off of the end of the wand.

Adicionar comentário

The brush nozzle attachment has two parts, which can be separated and replaced. The front of the vacuum has slots to hold up to two vacuum attachments. To store, simply place the attachment in the framed slots.
  • The brush nozzle attachment has two parts, which can be separated and replaced.

  • The front of the vacuum has slots to hold up to two vacuum attachments. To store, simply place the attachment in the framed slots.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Jorden Carroll

Member since: 18-01-2018

227 reputação

Autoria de 1 guia

Equipe

Cal Poly, Team S12-G1, Banghart Winter 2018 Membro de Cal Poly, Team S12-G1, Banghart Winter 2018

CPSU-BANGHART-W18S12G1

5 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Todo: 21