Conserte seus objetos Comunidade Loja

Bissell Bolt ION 2-in-1 Cordless Brush Replacement

Introdução

This guide will detail each step necessary to replace the brush roll on a Bissell Bolt ION 2-in-1 Cordless vacuum.

  1. Bissell Bolt ION 2-in-1 Cordless Brush Replacement, Brush Roll: passo 1, imagem 1 %32 Bissell Bolt ION 2-in-1 Cordless Brush Replacement, Brush Roll: passo 1, imagem 2 %32 Bissell Bolt ION 2-in-1 Cordless Brush Replacement, Brush Roll: passo 1, imagem 3 %32

    • Push the release button on the back side of the device near the swivel head, to detach the swivel for convenient access to the brush roll.

    Editar

  3. Bissell Bolt ION 2-in-1 Cordless Brush Replacement: passo 2, imagem 1 %32 Bissell Bolt ION 2-in-1 Cordless Brush Replacement: passo 2, imagem 2 %32 Bissell Bolt ION 2-in-1 Cordless Brush Replacement: passo 2, imagem 3 %32

    • The guard notch will automatically be down in the locked position.

    • Slide the guard notch to the unlocked position.

    Editar

  4. Bissell Bolt ION 2-in-1 Cordless Brush Replacement: passo 3, imagem 1 %32 Bissell Bolt ION 2-in-1 Cordless Brush Replacement: passo 3, imagem 2 %32

    • Lift up the latch to the right of the guard notch to access the brush.

    • While holding up the latch remove the brush.

    • Hold up latch to place new brush roll back into place.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 2 outros contribuidores

Benjamin Bautista

Membro desde: 09/11/17

140 Reputação

Autoria de 1 guia

Emblemas: 6

+3 outros emblemas

Equipe

CSU Fullerton, Team S1-G3, Bruce Fall 2017 Membro de CSU Fullerton, Team S1-G3, Bruce Fall 2017

CSUF-BRUCE-F17S1G3

Membros da 3

Autoria de 5 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 9

Duração total: 707