Introdução

This guide will show you how to remove the rough coil of the magneto. A bad rough coil can cause the aircraft engine to run poorly and shake.

Peças

Não são necessárias peças.

  1. Use a #2 Flathead screw driver to remove the five screws on the body of the magneto.
    • Use a #2 Flathead screw driver to remove the five screws on the body of the magneto.

  2. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  3. Locate the two screws, one on the left and one on the right, of the primary circuit.
    • Locate the two screws, one on the left and one on the right, of the primary circuit.

    • Remove the screws using a #2 Flathead screw driver.

  4. Remove the primary circuit and replace it.
    • Remove the primary circuit and replace it.

    • The super coil may seem as though it does not come out but it does, it can just be a little jammed.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Kelsi English

Member since: 26-09-2012

381 reputação

5 Guides authored

Equipe

Cal Poly, Team 1-2, Propen Fall 2012 Membro de Cal Poly, Team 1-2, Propen Fall 2012

CPSU-PROPEN-F12S1G2

4 Membros

5 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 9

Todo: 1,831