Conserte seus objetos Comunidade Loja

Bella 4-Slice Toaster Oven Heating Element Replacement

Introdução

If the heating element fails for any reason, and needs to be replaced, this guide will walk you through the simple steps required to replace the component.

O que você precisa

  1. Bella 4-Slice Toaster Oven Heating Element Replacement, Outer Shell: passo 1, imagem 1 %32

    • Remove five 11.6 mm Phillips #2 screws from the rear of the device.

    Editar

  2. Bella 4-Slice Toaster Oven Heating Element Replacement: passo 2, imagem 1 %32

    • Open the front glass door of the toaster oven.

    Editar

  3. Bella 4-Slice Toaster Oven Heating Element Replacement: passo 3, imagem 1 %32

    • Locate retaining screw on the upper-middle portion of the door frame.

    Editar

  4. Bella 4-Slice Toaster Oven Heating Element Replacement: passo 4, imagem 1 %32

    • Remove one 21.9 mm Phillips #2 retaining screw from upper-middle portion of door frame.

    Editar

  5. Bella 4-Slice Toaster Oven Heating Element Replacement: passo 5, imagem 1 %32

    • Flip toaster onto back panel with feet facing forward.

    Editar

  7. Bella 4-Slice Toaster Oven Heating Element Replacement: passo 6, imagem 1 %32

    • Use spudger to pry the grey rubber inserts from the black plastic feet.

    Editar

  8. Bella 4-Slice Toaster Oven Heating Element Replacement: passo 7, imagem 1 %32

    • Remove four 13.7mm Phillips #2 screws from black plastic feet to separate the cover from the device.

    Editar

  9. Bella 4-Slice Toaster Oven Heating Element Replacement: passo 8, imagem 1 %32

    • Lift the black outer cover off of the toaster

    Editar

  10. Bella 4-Slice Toaster Oven Heating Element Replacement, Heating Element: passo 9, imagem 1 %32

    • Remove the red wire from the heating element.

    Editar

  11. Bella 4-Slice Toaster Oven Heating Element Replacement: passo 10, imagem 1 %32

    • Remove white wire from the opposite side of the heating element.

    Editar

  12. Bella 4-Slice Toaster Oven Heating Element Replacement: passo 11, imagem 1 %32

    • Use a metal spudger to unfold the tabs of metal that hold heating element in place.

    Editar

  13. Bella 4-Slice Toaster Oven Heating Element Replacement: passo 12, imagem 1 %32 Bella 4-Slice Toaster Oven Heating Element Replacement: passo 12, imagem 2 %32 Bella 4-Slice Toaster Oven Heating Element Replacement: passo 12, imagem 3 %32

    • Gently push the heating element from the side with the red wire to remove it from the toaster.

    Editar

  14. Bella 4-Slice Toaster Oven Heating Element Replacement: passo 13, imagem 1 %32

    • Repeat steps 1-4 for the second heating element.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 9

Últimos 30 dias: 48

Duração total: 1,897