Conserte seus objetos Comunidade Loja

Bell and Howell DNV16HDZ Hand Strap Replacement

O que você precisa

  1. Bell and Howell DNV16HDZ Hand Strap Replacement, Lens Assembly: passo 1, imagem 1 %32 Bell and Howell DNV16HDZ Hand Strap Replacement, Lens Assembly: passo 1, imagem 2 %32

    • Remove the five 30mm Phillips #0 screws on the bottom of the camera.

    Editar

  2. Bell and Howell DNV16HDZ Hand Strap Replacement: passo 2, imagem 1 %32

    • Use a plastic opening tool to disconnect the internal hinges that snaps the camera into place.

    • Using a plastic opening tool is important since a metal one will scratch or damage the thin plastic hinges that hold the camera together.

    Editar

  4. Bell and Howell DNV16HDZ Hand Strap Replacement: passo 3, imagem 1 %32

    • It will still be connected by a plastic film. This can also be disconnected by pulling up the white part where it connects to the light circuit board.

    Editar

  5. Bell and Howell DNV16HDZ Hand Strap Replacement, Hand Strap: passo 4, imagem 1 %32 Bell and Howell DNV16HDZ Hand Strap Replacement, Hand Strap: passo 4, imagem 2 %32

    • Pull the side with the hand strap upwards to disconnect it from the camcorder.

    • Unscrew the four 40 mm Phillips #0 screws.

    • Add the new hand strap now.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 1 outro contribuidor

Jerry Hadjah

Membro desde: 03/04/16

525 Reputação

Autoria de 5 guias

Emblemas: 10

+7 outros emblemas

Equipe

UMass Dartmouth, Team 8-4, Botvin Spring 2016 Membro de UMass Dartmouth, Team 8-4, Botvin Spring 2016

UMASSD-BOTVIN-S16S8G4

Membros da 3

Autoria de 12 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 10

Últimos 30 dias: 16

Duração total: 201