Ir para o conteúdo principal

Beiens Cartoon RC Race Car Remote Control Buttons Replacement

O que você precisa

  1. Beiens Cartoon RC Race Car Remote Control Buttons Replacement, Remote Control Buttons: passo 1, imagem 1 %32
    • Hold the remote control with the backside facing you, and using the Phillips #00 screwdriver, unscrew the six 6.5 mm screws on the back of the controller that holds the remote together.

    • Remove the back side of remote.

  2. Beiens Cartoon RC Race Car Remote Control Buttons Replacement: passo 2, imagem 1 %32
    • Open the remote control and remove the blue circular plastic buttons located on the right and left side on remote.

  3. Beiens Cartoon RC Race Car Remote Control Buttons Replacement: passo 3, imagem 1 %32
    • Place the two new circular blue buttons inside their designated slots in the remote control.

    • Take the backside of the remote and place it on the remote. Using your Phillips #00 screwdriver, screw the six 6.5 mm screws back into place.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Amber Ashley

Membro desde: 10/01/15

329 Reputação

Autoria de 4 guias

Equipe

USF Tampa, Team 1-6, Leahy Fall 2015 Membro de USF Tampa, Team 1-6, Leahy Fall 2015

USFT-LEAHY-F15S1G6

Membros da 3

Autoria de 8 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Duração total: 315