Esta versão pode conter edições incorretas. Mude para o último instantâneo verificado.
O que você precisa
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Using the spudger, create space between the speaker covers and then remove.
-
On the underside of the device, remove the rubber stand with the BeatsPill logo on it.
-
Using an ESD-safe Phillips #0 screwdriver, remove the four screws that were underneath the rubber stand.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Remove the two screws with a Phillips #0 screwdriver.
-
Slowly remove the center band and two clip rings until the adhesive separates. Sit to the side the clip rings and the center band
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Use the spudger to pry the device apart along its seam, starting in the middle.
-
Open the device to separate the front and back panels.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Carefully remove the yellow, red, black, and white wires from the motherboard.
-
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Carefully remove the black and red NFC sensor wires.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Carefully remove the control cables (4 black, 1 red).
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Using a Phillips #0 Screwdriver, unscrew the four screws holding the bands that go over the battery.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Using the same screwdriver, remove the motherboard screws along with the rubber stoppers.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Gently remove the motherboard from the case
-
Remove the yellow NFC module with Tweezers
The batteries I bought from Amazon came with two batteries alreaded connected to one another. One one set of leads needs to be soldered
Where is the yellow NFC module in the photo? I do not think there is a picture of it removed.
You see a part of it on Photoshop step 7, on the top, it’s stuck behind the motherboard screws, just lift it loose with a tweezer or something, it could be a little bit ‘glued’/fixed to its surroundings. After battery change, just put it back, does not need any fixation.
lofors -
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Using a soldering iron attach the new battery to the motherboard with the red wire connecting to the 0.2 volts (+) and black wire connecting to the ground (-). See the soldering guide for more information on how to perform this step.
-
Cancelar: não concluí este guia.
28 outras pessoas executaram este guia.
Equipe
USF Tampa, Team 3-2, Hickman Winter 2015 Membro de USF Tampa, Team 3-2, Hickman Winter 2015
USFT-HICKMAN-W15S3G2
Membros da 4
Autoria de 6 guias
10 comentários
I got a replacement battery for 2.0 from Amazon, it works great! here is the link:
https://www.amazon.com/dp/B072PHZ235
And it also has battery for pill 1.0, pill XL...
Jailene -
Could you please tell what is the yellow card in the last picture?
Looks like the Bluetooth antenna
It is the NFC module
bobapunk -
hello, my dear friend, we have remplacement battery for Beat Pill 2.0. are you interested in introducing it? feel free to contact me.
I bought a cheap speaker for no where near the price of what the pill cost me. The battery never runs out! I have had it for years! The pill on the other hand I have changed one already and does not even turn on! Beats should be ashamed for charging what they do for such a poor product with a expensive price tag! And now I’m expected to open it up myself and change the battery! I feel completely mugged off by BEATS. You know that saying about the more expensive the better the product? It’s a 100% lies! Don’t be fooled by a label! Most of the things you purchase are made in China or India and sent to another country where they are stamped and claim it’s made in that county. Wake up people !
I bought a brand new Beats Pill 1.0 online last week the first night it seemed to work all right the next day I charged it I plugged it in and it was crackling on the left hand side from the front and now the whole volume of both sides very low but it is still getting a Bluetooth connectivity I tried to reset it by holding the baby and the power button to get this thing in the back to flag it would not reset that way any suggestions I meant it is for a lot of money I paid $170 I thought I was getting a brand new device
Steven Sudnick - Responder