Introdução
This guide will walk you through the process of replacing the ambient air intake filters in a Bear 1000 Ventilator. Found on page 97 in the full service manual.
O que você precisa
-
-
Turn off the ventilator and disconnect from AC power and pressurized gas at the wall sources.
-
Quase terminado!
To reassemble your device, follow these instructions in reverse order.
Conclusão
To reassemble your device, follow these instructions in reverse order.
Equipe
Cal Poly, Team S7-G12, Paton Fall 2020 Membro de Cal Poly, Team S7-G12, Paton Fall 2020
CPSU-PATON-F20S7G12
Membros da 2
Autoria de 6 guias
