Ir para o conteúdo principal

Back Panel Replacement

O que você precisa

  1. Back Panel Replacement, Back Panel: passo 1, imagem 1 %32 Back Panel Replacement, Back Panel: passo 1, imagem 2 %32 Back Panel Replacement, Back Panel: passo 1, imagem 3 %32
    • First, remove the 6 screws in the back panel and pull the back panel off.

    • Separate the halves of the controller. However, be careful when separating due to the little wires that could get mixed up.

  2. Back Panel Replacement: passo 2, imagem 1 %32 Back Panel Replacement: passo 2, imagem 2 %32 Back Panel Replacement: passo 2, imagem 3 %32
    • Next, remove the rumble motor by unscrewing the 2 screws connecting it.

  3. Back Panel Replacement: passo 3, imagem 1 %32 Back Panel Replacement: passo 3, imagem 2 %32 Back Panel Replacement: passo 3, imagem 3 %32
    • Finally remove the screws holding in the right and left triggers. It's easiest to hold the trigger together as shown in the third picture. Remove both the left and right trigger, and then you have successfully removed your back panel.

Conclusão

To reassemble your device, follow these instructions in reverse order.

David Mistretta

Membro desde: 10/26/16

101 Reputação

Autoria de 1 guia

Equipe

UMass Dartmouth, Team 3-5, Isaacson Fall 2016 Membro de UMass Dartmouth, Team 3-5, Isaacson Fall 2016

UMASSD-ISAACSON-F16S3G5

Membros da 3

Autoria de 10 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Duração total: 280