Ir para o conteúdo principal

BLU Life X8 Front Camera Replacement

O que você precisa

  1. BLU Life X8 Front Camera Replacement, Battery: passo 1, imagem 1 %32 BLU Life X8 Front Camera Replacement, Battery: passo 1, imagem 2 %32
    • Flip the phone over so that the screen is facing down.

    • Slide the opening tool between the micro-USB port and the back cover.

    • Use the opening tool to create a gap.

  2. BLU Life X8 Front Camera Replacement: passo 2, imagem 1 %32
    • Use your thumb to pry off the back panel once the gap is large enough.

  3. BLU Life X8 Front Camera Replacement: passo 3, imagem 1 %32
    • Once the back panel is off, locate the indent at the bottom of the battery.

    • Use your thumb to slip the battery out of the case.

  4. BLU Life X8 Front Camera Replacement, Motherboard: passo 4, imagem 1 %32 BLU Life X8 Front Camera Replacement, Motherboard: passo 4, imagem 2 %32
    • Use the Phillips #00 bit to undo the nine 1.5mm screws from the back of the device.

  5. BLU Life X8 Front Camera Replacement: passo 5, imagem 1 %32
    • Wedge the opening tool into the seam of between the screen and the gray frame.

    • Run the opening tool along the seam to release the clips that hold the two pieces together.

    • You may need to use the opening picks to prevent the clips from re-engaging.

  6. BLU Life X8 Front Camera Replacement: passo 6, imagem 1 %32
    • Once all the clips have been released, lift the frame and set it aside.

  7. BLU Life X8 Front Camera Replacement: passo 7, imagem 1 %32 BLU Life X8 Front Camera Replacement: passo 7, imagem 2 %32
    • Use the Phillips #00 Phillips bit to undo the two 1.5mm screws from the motherboard.

  8. BLU Life X8 Front Camera Replacement: passo 8, imagem 1 %32 BLU Life X8 Front Camera Replacement: passo 8, imagem 2 %32 BLU Life X8 Front Camera Replacement: passo 8, imagem 3 %32
    Ferramenta utilizada nesse passo:
    Tweezers
    $4.99
    Comprar
    • Use the tweezers to peel away the mesh tape and reveal the ribbon connectors.

    • Use the tweezers to lift the brown and black tabs to release the ribbon cables and unlock them.

  9. BLU Life X8 Front Camera Replacement: passo 9, imagem 1 %32
    • The ribbon cables should be free. Pull back on the ribbons to release them from their connectors.

  10. BLU Life X8 Front Camera Replacement: passo 10, imagem 1 %32
    • Slowly lift the vibration motor away from the frame and peel up the tape.

  11. BLU Life X8 Front Camera Replacement, Front Camera: passo 11, imagem 1 %32
    • Flip the motherboard over.

    • Lift the front camera from its housing.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Alexander Prasil

Membro desde: 09/28/17

543 Reputação

Autoria de 5 guias

Equipe

USF Tampa, Team S1-G2, Nance Fall 2017 Membro de USF Tampa, Team S1-G2, Nance Fall 2017

USFT-NANCE-F17S1G2

Membros da 4

Autoria de 6 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 2

Últimos 30 dias: 10

Duração total: 146