Ir para o conteúdo principal

Azpen A701 General Disassembly Prerequisite Guide Replacement

O que você precisa

  1. Azpen A701 General Disassembly Prerequisite Guide Replacement, General Disassembly Prerequisite Guide: passo 1, imagem 1 %32
    • Remove the two 2cm screws on the bottom using the PH0 Phillips head screw driver.

  2. Azpen A701 General Disassembly Prerequisite Guide Replacement: passo 2, imagem 1 %32 Azpen A701 General Disassembly Prerequisite Guide Replacement: passo 2, imagem 2 %32
    • Pry open back piece with plastic spudger.

    • Remove the back piece of the device.

    • The back panel may be difficult to pry off, use gentle force.

  3. Azpen A701 General Disassembly Prerequisite Guide Replacement: passo 3, imagem 1 %32
    • Disconnect speaker (which is attached by black and red wires) from back piece using plastic spudger.

  4. Azpen A701 General Disassembly Prerequisite Guide Replacement: passo 4, imagem 1 %32
    • Gently pry the battery off of the device with the plastic spudger.

    • There is a large amount of glue holding the battery to the device.

    • Do not puncture the battery with the plastic spudger.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Michael

Membro desde: 03/11/15

568 Reputação

Autoria de 4 guias

Equipe

Colorado Springs, Team 2-1, Panko Spring 2015 Membro de Colorado Springs, Team 2-1, Panko Spring 2015

UCCS-PANKO-S15S2G1

Membros da 3

Autoria de 12 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 3

Últimos 30 dias: 3

Duração total: 353