Axess TA2513-10WT Back Cover Replacement

Introdução

Removal of the plastic cover on the back of the Axess TA2513-10WT tablet will be necessary for any replacements within the tablet. These instructions will teach you how to remove the back cover either for back cover replacement or as a prerequisite for other part replacements.

O que você precisa

Passo 1 Back Cover

Axess TA2513-10WT Back Cover Replacement, Back Cover: passo 1, imagem 1 %32

Lay the tablet down on a flat surface with the screen facing up, and the external camera facing upwards and closest to you.

Editar

Passo 2

Axess TA2513-10WT Back Cover Replacement: passo 2, imagem 3 %32

Insert the plastic opening tool in the space between the screen and the back cover above the volume buttons.
Slide the plastic opening tool gently along the sides.
If a small gap is not created between the screen and the back cover, pry gently upward at each of these latching points.

Editar

Passo 3

Place the spudger in an open space to keep the back case from shutting while you continue to slide the opening tool.

Editar

Passo 4

Remove the back cover with your hands once all points have been unlatched. It should separate completely from the screen that contains the battery and chip components.

Editar