Ir para o conteúdo principal
  1. Autosampler Reset for Node Triggered Sampling  (For Old & New Versions), Switch to manual mode: passo 1, imagem 1 %32 Autosampler Reset for Node Triggered Sampling  (For Old & New Versions), Switch to manual mode: passo 1, imagem 2 %32
    • To enable manual mode, flip the switch to "Manual Mode"

    • LCD screen will turn on

  2. Autosampler Reset for Node Triggered Sampling  (For Old & New Versions), Restart the sampling program: passo 2, imagem 1 %32 Autosampler Reset for Node Triggered Sampling  (For Old & New Versions), Restart the sampling program: passo 2, imagem 2 %32
    • Press On then press Start Sampling

    • Press Enter

  3. Autosampler Reset for Node Triggered Sampling  (For Old & New Versions), Select bottle: passo 3, imagem 1 %32 Autosampler Reset for Node Triggered Sampling  (For Old & New Versions), Select bottle: passo 3, imagem 2 %32 Autosampler Reset for Node Triggered Sampling  (For Old & New Versions), Select bottle: passo 3, imagem 3 %32
    • Press the number of the bottle you want to sample on

    • Press Enter

    • LCD should now show which bottle it will take a sample in

  4. Autosampler Reset for Node Triggered Sampling  (For Old & New Versions), Switch to autonomous mode: passo 4, imagem 1 %32 Autosampler Reset for Node Triggered Sampling  (For Old & New Versions), Switch to autonomous mode: passo 4, imagem 2 %32
    • To enable autonomous mode, flip switch to "Node Trigger Mode"

    • LCD should turn off

    • If the autosampler is to be remotely triggered, avoid using the ON/OFF button to power off the sampler.

Conclusão

Now the sampler is ready to be triggered remotely by an open-storm sensor node.

Uma outra pessoa concluiu este guia.

Brandon Wong

Membro desde: 16/01/2018

502 Reputação

2 Guias de autoria

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 383