Automatic Coffee Machine Cecotec Power Matic-Ccino 7000 or Rooma RM-A7 Disassembly

Introdução

This is a basic guide to disassembling your Cecotec Power Matic-Ccino 7000 or Rooma RM-A7 to access the core components of the appliance. If you are noticing issues with the burr grinder, water pump, heating element, control board, or any other component on the interior of the device, this guide will instruct you on how to access those parts. This will also allow you to open up the machine for cleaning and descaling of the brewing components.

O que você precisa

Passo 1 Taking Main cover off

Automatic Coffee Machine Cecotec Power Matic-Ccino 7000 or Rooma RM-A7 Disassembly, Taking Main cover off: passo 1, imagem 1 %32

Automatic Coffee Machine Cecotec Power Matic-Ccino 7000 or Rooma RM-A7 Disassembly, Taking Main cover off: passo 1, imagem 2 %32

Using a T10 screwdriver, remove the eight screws located on the rear panel of the device (4 towards the bottom, and 4 towards the top).

Editar

Passo 2

Unscrew one PH2 screw.
Use a spudger or a thin curved tool such as a dental pick to remove the bean hopper of the burr grinder.
Remove the grind selector by pulling the dial directly away from the machine which will remove it from the housing.

Editar

Passo 3

The Hex screw must be unscrewed in the clockwise direction. Failure to do so could result in damage of the grinding mechanism.
Unscrew the one 4mm Hex in a clockwise fashion and remove the black plastic cover over the burrset.
Remove the black plastic cover over the burr set.
The burr set should not be completely visible.