Introdução

The LCD screen is the main display of the Audiovox CDM-8910.

Peças

Não são necessárias peças.

  1. With phone in the flipped-open position, use a spudger to remove the four (4) rubber pads (one shown in red circle) located near the corners of the face with the LCD screen.
    • With phone in the flipped-open position, use a spudger to remove the four (4) rubber pads (one shown in red circle) located near the corners of the face with the LCD screen.

    Adicionar comentário

  2. Use a small Phillips head screwdriver to remove the four (4) screws exposed by removed rubber pads.
    • Use a small Phillips head screwdriver to remove the four (4) screws exposed by removed rubber pads.

    Adicionar comentário

    • Use a spudger to pry the front cover off of the phone, gradually working your way around the front face.

    Adicionar comentário

    • Use a spudger to lift away and remove the metallic frame (in blue).

    • Use the spudger to lift away the two electrical contacts (in red).

    • Use the spudger to lift away the speaker (in yellow).

    Adicionar comentário

    • This is what the rear of the LCD screen should look like before proceeding. Note all necessary connections are undone.

    Adicionar comentário

    • Use a spudger to lift away the LCD screen.

    Adicionar comentário

    • LCD screen successfully removed!

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Kevin Jafarey

Member since: 04-10-2010

11 reputação

2 Guides authored

Equipe

Cal Poly, Team 3-24, Regan Fall 2010 Membro de Cal Poly, Team 3-24, Regan Fall 2010

CPSU-REGAN-F10S3G24

4 Membros

12 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 2,762