Peças

Não são necessárias peças.

  1. Using the Phillips 1 screwdriver, remove the laptop's back panel.
    • Using the Phillips 1 screwdriver, remove the laptop's back panel.

    • Pry open the Keyboard/Touch pad.

    • Use a plastic or metal spudger to separate the keyboard from the back panel and lift the keyboard out of place.

    Adicionar comentário

  2. Detach keyboard and touch screen cables
    • Detach keyboard and touch screen cables

    • These are the cable that are holding the keyboard and touch screen together

    Adicionar comentário

    • Remove the following four screws: Four 4 mm Phillips #0 using a phillips screwdriver.

    • Slide out the hard drive

    Adicionar comentário

    • Slide out the hard drive

    Adicionar comentário

    • Detach speaker

    Adicionar comentário

    • Remove motherboard screws

    • These would be located on the green panel which is the motherboard

    Adicionar comentário

    • Carefully remove motherboard

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Svetlana Pimentel

Member since: 17-10-2017

201 reputação

2 Guides authored

Equipe

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Todo: 83