Pular para o conteúdo principal

Introdução

This guide will show the reader how to replace their failing USB Port Plate with a new one. If devices plugged into the USB ports aren't connecting properly, the plate may need to be replaced.

Peças

Nenhum componente especificado.

  1. Make sure the computer is turned off.
    • Make sure the computer is turned off.

    • Flip the device over so that the back cover is facing you.

  2. Remove the four 5mm Phillips #1 screws from the top of the laptop. Remove the two 6mm Phillips #1 screws from the sides of the laptop.
    • Remove the four 5mm Phillips #1 screws from the top of the laptop.

    • Remove the two 6mm Phillips #1 screws from the sides of the laptop.

    • Remove the four 2mm Phillips #1 screws from the bottom of the laptop.

  3. Use a plastic opening tool to gently pry the bottom of the laptop up. Slowly slide it along the edges, twisting it every so often to pop the bottom of the laptop out of the clips holding it in place. Use a plastic opening tool to gently pry the bottom of the laptop up. Slowly slide it along the edges, twisting it every so often to pop the bottom of the laptop out of the clips holding it in place. Use a plastic opening tool to gently pry the bottom of the laptop up. Slowly slide it along the edges, twisting it every so often to pop the bottom of the laptop out of the clips holding it in place.
    • Use a plastic opening tool to gently pry the bottom of the laptop up. Slowly slide it along the edges, twisting it every so often to pop the bottom of the laptop out of the clips holding it in place.

  4. PC Laptop Batteries

    An easy fix for a big power boost.

    Comprar agora

    PC Laptop Batteries

    An easy fix for a big power boost.

    Comprar agora
  5. Lift off the cover and remove the back cover from the device.
    • Lift off the cover and remove the back cover from the device.

  6. Slide the hard drive out of the SATA port and remove it from the device.
    • Slide the hard drive out of the SATA port and remove it from the device.

  7. Remove the two 5.0 mm Phillips #1 screws shown.
    • Remove the two 5.0 mm Phillips #1 screws shown.

    • Remove the two 3.0 mm Phillips #1 screws shown.

  8. Using a plastic opening tool, pry open the hinge shown until your fingers can fit under it.
    • Using a plastic opening tool, pry open the hinge shown until your fingers can fit under it.

  9. Pull the hinge the rest of the way up.
    • Pull the hinge the rest of the way up.

  10. Disconnect the plate from the shown connector. The USB port plate is now disconnected from your device.
    • Disconnect the plate from the shown connector. The USB port plate is now disconnected from your device.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Kevin Kochanek

Membro desde: 06-11-2018

181 reputação

2 Guias de autoria

Equipe

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Todo: 73