Pular para o conteúdo principal

Peças

Nenhum componente especificado.

  1. Flip the computer over so that it is upside down. Slide both latches away from each other (towards the outside).
    • Flip the computer over so that it is upside down.

    • Slide both latches away from each other (towards the outside).

    • Push the battery out with your fingers.

    • The actual battery is not shown in the photograph.

  2. Remove the two highlighted screws. Remove the two highlighted screws.
    • Remove the two highlighted screws.

  3. Pry open case at highlighted area. Actual hard drive is not shown in the image.
    • Pry open case at highlighted area.

    • Actual hard drive is not shown in the image.

  4. Pull out hard drive laterally from slot shown. Pull out hard drive laterally from slot shown.
    • Pull out hard drive laterally from slot shown.

  5. First, remove the highlighted screw (bottom right corner in the picture.) Using any tool that fits into the highlighted hole, carefully push CD/DVD drive out.
    • First, remove the highlighted screw (bottom right corner in the picture.)

    • Using any tool that fits into the highlighted hole, carefully push CD/DVD drive out.

Conclusão

To reassemble your device, just push new CD/DVD driver back in

Jong Park

Membro desde: 24-06-2010

114 reputação

5 Guias de autoria

Equipe

Cal Poly, Team 2-9, Johann Summer 2010 Membro de Cal Poly, Team 2-9, Johann Summer 2010

CPSU-JOHANN-R10S2G9

5 Membros

10 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Todo: 4,026