Introdução

This guide will demonstrate how to replace the optical drive in the ASUS ROG G53SW-XT1.

Peças

Não são necessárias peças.

  1. Unplug the power cable and flip the computer over.
    • Unplug the power cable and flip the computer over.

  2. Unlock the battery by pushing the switch to the right.
    • Unlock the battery by pushing the switch to the right.

  3. Push and hold the left switch, then pull the battery out. Push and hold the left switch, then pull the battery out.
    • Push and hold the left switch, then pull the battery out.

  4. Insert a spudger, or plastic opening tool, into these five slots and pry upwards to pop up the keyboard. Insert a spudger, or plastic opening tool, into these five slots and pry upwards to pop up the keyboard. Insert a spudger, or plastic opening tool, into these five slots and pry upwards to pop up the keyboard.
    • Insert a spudger, or plastic opening tool, into these five slots and pry upwards to pop up the keyboard.

  5. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  6. Disconnect the keyboard ribbon cables from the motherboard. Disconnect the keyboard ribbon cables from the motherboard. Disconnect the keyboard ribbon cables from the motherboard.
    • Disconnect the keyboard ribbon cables from the motherboard.

  7. Insert your screwdriver into the locking mechanism and slide it to the left. This will unlock the hand rest and allow you to pull it free. Insert your screwdriver into the locking mechanism and slide it to the left. This will unlock the hand rest and allow you to pull it free. Insert your screwdriver into the locking mechanism and slide it to the left. This will unlock the hand rest and allow you to pull it free.
    • Insert your screwdriver into the locking mechanism and slide it to the left. This will unlock the hand rest and allow you to pull it free.

  8. Remove the fourteen Phillips #0 screws.
    • Remove the fourteen Phillips #0 screws.

  9. Flip the laptop over and pull off the bottom cover. Flip the laptop over and pull off the bottom cover.
    • Flip the laptop over and pull off the bottom cover.

  10. Remove the single 7mm Phillips #0 screw holding the hard drive in place.
    • Remove the single 7mm Phillips #0 screw holding the hard drive in place.

  11. Slide the hard drive out of the casing. Slide the hard drive out of the casing.
    • Slide the hard drive out of the casing.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 4

Todo: 49