Ir para o conteúdo principal

Asus Eee PC 1005HA Screen Replacement

O que você precisa

  1. Asus Eee PC 1005HA Screen Replacement, Battery: passo 1, imagem 1 %32
    • Lay the laptop upside down.

    • Locate the two battery lock tabs.

  2. Asus Eee PC 1005HA Screen Replacement: passo 2, imagem 1 %32 Asus Eee PC 1005HA Screen Replacement: passo 2, imagem 2 %32 Asus Eee PC 1005HA Screen Replacement: passo 2, imagem 3 %32
    • Slide the tabs outward to unlock the battery.

    • The left tab will remain unlocked, while the right tab must be held.

    • Holding the right tab open, slide the battery out of the laptop.

  3. Asus Eee PC 1005HA Screen Replacement, Screen: passo 3, imagem 1 %32 Asus Eee PC 1005HA Screen Replacement, Screen: passo 3, imagem 2 %32 Asus Eee PC 1005HA Screen Replacement, Screen: passo 3, imagem 3 %32
    • Using tweezers, remove the six screw covers on the screen bezel.

    • Remove the six 4.6 mm screws from the bezel.

  4. Asus Eee PC 1005HA Screen Replacement: passo 4, imagem 1 %32
    • Use a plastic opening tool to disengage the plastic clips that secure the screen bezel to the display.

    • Carefully remove the bezel from the display.

  5. Asus Eee PC 1005HA Screen Replacement: passo 5, imagem 1 %32 Asus Eee PC 1005HA Screen Replacement: passo 5, imagem 2 %32 Asus Eee PC 1005HA Screen Replacement: passo 5, imagem 3 %32
    • Remove the four 3.6 mm screws securing the screen.

    • Slowly lift the screen up from the rest of the laptop.

    • The screen is still attached to the laptop by a set of cables. Be careful not to damage them while removing the screen.

  6. Asus Eee PC 1005HA Screen Replacement: passo 6, imagem 1 %32 Asus Eee PC 1005HA Screen Replacement: passo 6, imagem 2 %32
    • Remove the plastic tape securing the display cables to the back of the screen.

    • Slide the display cable connector out its socket on the back of the screen.

  7. Asus Eee PC 1005HA Screen Replacement: passo 7, imagem 1 %32 Asus Eee PC 1005HA Screen Replacement: passo 7, imagem 2 %32
    • Remove the four 3.1 mm housing screws on the sides of the display housing frame

    • Remove the housing frame.

Conclusão

To reassemble your device, follow these instructions in reverse order.

13 outras pessoas executaram este guia.

Mitchell Cesare

Membro desde: 01/31/12

784 Reputação

Autoria de 4 guias

Equipe

Cal Poly, Team 11-22, Maness Winter 2012 Membro de Cal Poly, Team 11-22, Maness Winter 2012

CPSU-MANESS-W12S11G22

Membros da 3

Autoria de 12 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 2

Últimos 30 dias: 34

Duração total: 21,214