Introdução

Are your keys not clicking? Did you spill any liquids on your keyboard recently? This guide will help you resolve these situations.

  1. Use a metal spudger to pry off the two feet closest to the hinge of the laptop. The feet are attached to the laptop by adhesives, therefore they may not stick as well after multiple removals. The feet are attached to the laptop by adhesives, therefore they may not stick as well after multiple removals.
    • Use a metal spudger to pry off the two feet closest to the hinge of the laptop.

    • The feet are attached to the laptop by adhesives, therefore they may not stick as well after multiple removals.

  2. Use a Phillips #0 screwdriver to unscrew the six 5mm screws. Use a Phillips #0 screwdriver to unscrew the two 6mm screws.
    • Use a Phillips #0 screwdriver to unscrew the six 5mm screws.

    • Use a Phillips #0 screwdriver to unscrew the two 6mm screws.

  3. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  4. Use a plastic opening tool to pry the keyboard off the edges of the computer. The edges will make a popping noise.
    • Use a plastic opening tool to pry the keyboard off the edges of the computer.

    • The edges will make a popping noise.

  5. Flip up the white bar that connects the thin white strip using a plastic opening tool. Grab the thin white strip and pull straight back to remove the strip from the connector. Grab the thin white strip and pull straight back to remove the strip from the connector.
    • Flip up the white bar that connects the thin white strip using a plastic opening tool.

    • Grab the thin white strip and pull straight back to remove the strip from the connector.

  6. Use a plastic opening tool to lift the black bar above the wide black strip in the connector. Grab the wide black strip and pull straight back to remove the strip from the connector. Remove the keyboard by lifting it straight up.
    • Use a plastic opening tool to lift the black bar above the wide black strip in the connector.

    • Grab the wide black strip and pull straight back to remove the strip from the connector.

    • Remove the keyboard by lifting it straight up.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Brittany M Won

Member since: 18-04-2018

577 reputação

5 Guides authored

Equipe

Cal Poly, Team S17-G4, Livingston Spring 2018 Membro de Cal Poly, Team S17-G4, Livingston Spring 2018

CPSU-LIVINGSTON-S18S17G4

4 Membros

6 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Todo: 88