Ir para o conteúdo principal

Astak Mole Antenna Replacement

O que você precisa

  1. Astak Mole Antenna Replacement, Lower Case: passo 1, imagem 1 %32
    • Remove the four bottom tabs in order to access the bottom screws.

  2. Astak Mole Antenna Replacement: passo 2, imagem 1 %32
    • Remove all four 14 mm Phillips #1 screws.

  3. Astak Mole Antenna Replacement: passo 3, imagem 1 %32
    • Remove the SD card.

  4. Astak Mole Antenna Replacement: passo 4, imagem 1 %32
    • Pry up the motherboard on the four points using a spudger.

    • The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.

  5. Astak Mole Antenna Replacement: passo 5, imagem 1 %32
    • Gently pull back the motherboard to expose many of the component's wired connections.

  6. Astak Mole Antenna Replacement, Antenna: passo 6, imagem 1 %32 Astak Mole Antenna Replacement, Antenna: passo 6, imagem 2 %32
    • Unscrew the antenna in a counter-clockwise rotation.

  7. Astak Mole Antenna Replacement: passo 7, imagem 1 %32
    • Take out the screw holding the antenna wire with the PH1 size Phillips head bit.

    • Screw length: 5.3mm

  8. Astak Mole Antenna Replacement: passo 8, imagem 1 %32
    • Gently pry open the circuit board attached to the antenna wire using a metal spudger.

    • The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.

  9. Astak Mole Antenna Replacement: passo 9, imagem 1 %32
    • Remove the antenna female end from the motherboard.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Equipe

USF Tampa, Team 2-2, Blackwell Fall 2016 Membro de USF Tampa, Team 2-2, Blackwell Fall 2016

USFT-BLACKWELL-F16S2G2

Membros da 4

Autoria de 12 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 6

Últimos 30 dias: 15

Duração total: 449