Pular para o conteúdo principal

Introdução

This guide will show you how to replace the motherboard

  1. Remove the plastic cover over the batteries on both sides of the device.
    • Remove the plastic cover over the batteries on both sides of the device.

  2. Remove the batteries (may require a plastic opening tool or spudger to pop the batteries out).
    • Remove the batteries (may require a plastic opening tool or spudger to pop the batteries out).

  3. Using the Philips Screwdriver, remove the top 2 screws.
    • Using the Philips Screwdriver, remove the top 2 screws.

    • The screws are very small (2.5mm), put them somewhere you won't lose them.

  4. Using the Philips screwdriver, remove the bottom 2 screws (2.5mm).
    • Using the Philips screwdriver, remove the bottom 2 screws (2.5mm).

  5. Remove the face. Remove the face.
    • Remove the face.

  6. Remove four surrounding T5 screws as shown
    • Remove four surrounding T5 screws as shown

  7. Remove all four purple bumpers.  You may have to bend the metal surround out of the way.
    • Remove all four purple bumpers. You may have to bend the metal surround out of the way.

  8. Remove metal surround from the Jukebox. You may have to straighten out tabs that were bent during disassembly.
    • Remove metal surround from the Jukebox. You may have to straighten out tabs that were bent during disassembly.

  9. Desolder the motherboard from the frame at the eight locations shown. You may need to use a desoldering pump. Desolder the motherboard from the frame at the eight locations shown. You may need to use a desoldering pump.
    • Desolder the motherboard from the frame at the eight locations shown. You may need to use a desoldering pump.

  10. Desolder the remaining two points on the backside of the Jukebox. The Motherboard should now be free from the frame and ready for repair or replacement.
    • Desolder the remaining two points on the backside of the Jukebox.

    • The Motherboard should now be free from the frame and ready for repair or replacement.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Shaun Rifield

Membro desde: 21-03-2018

121 reputação

Autoria de 1 guia

Equipe

IUPUI, Team S2-G3, Freund Spring 2018 Membro de IUPUI, Team S2-G3, Freund Spring 2018

IUPUI-FREUND-S18S2G3

3 Membros

2 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 8

Todo: 80