Introdução

In this guide the user will learn how to disassemble an Archos Jukebox Recorder 20 in addition to learning how to replace the hard drive.

  1. Remove the plastic cover over the batteries on both sides of the device.
    • Remove the plastic cover over the batteries on both sides of the device.

  2. Remove the batteries (may require a plastic opening tool or spudger to pop the batteries out).
    • Remove the batteries (may require a plastic opening tool or spudger to pop the batteries out).

  3. Use the T10 Torx Screwdriver to remove the 2 torx screws on each side of the device. Two on each side for a total of four.
    • Use the T10 Torx Screwdriver to remove the 2 torx screws on each side of the device.

      • Two on each side for a total of four.

  4. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  5. Remove the 2 screws on the top and the 2 screws on the bottom of the device using a Phillips #0 screwdriver. Remove the 2 screws on the top and the 2 screws on the bottom of the device using a Phillips #0 screwdriver.
    • Remove the 2 screws on the top and the 2 screws on the bottom of the device using a Phillips #0 screwdriver.

  6. Remove the outer metal casing of the device by popping it off with a plastic opening tool.
    • Remove the outer metal casing of the device by popping it off with a plastic opening tool.

  7. Remove the rubber bumpers on all four corners of the device.
    • Remove the rubber bumpers on all four corners of the device.

  8. Lift the hard drive out of its casing with the help of a plastic opening tool and slide it out. This will disconnect the pins connecting the drive  to the rest of the device. Lift the hard drive out of its casing with the help of a plastic opening tool and slide it out. This will disconnect the pins connecting the drive  to the rest of the device.
    • Lift the hard drive out of its casing with the help of a plastic opening tool and slide it out. This will disconnect the pins connecting the drive to the rest of the device.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Aidan Patterson

Member since: 08-01-2018

276 reputação

2 Guides authored

Equipe

IUPUI, Team S1-G4, Freund Spring 2018 Membro de IUPUI, Team S1-G4, Freund Spring 2018

IUPUI-FREUND-S18S1G4

3 Membros

2 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 3

Últimos 7 dias: 7

Últimos 30 dias: 18

Todo: 188