Introdução

This is a replacement guide for the Apple iSight webcam privacy lens. It will demonstrate step-by-step how to disassemble the webcam in order to access the privacy lens.

Peças

Não são necessárias peças.

  1. Remove two 3.55 mm screws that hold the body to the ball and socket joint using the PH000 screwhead.
    • Remove two 3.55 mm screws that hold the body to the ball and socket joint using the PH000 screwhead.

    Adicionar comentário

  2. Insert the tweezers into the crevice of the ball and socket joint, and prop up the tabs to remove the white ring from the body.
    • Insert the tweezers into the crevice of the ball and socket joint, and prop up the tabs to remove the white ring from the body.

    Adicionar comentário

    • Press the Apple logo through to pull apart the body frame from the body of the webcam.

    Adicionar comentário

    • Remove the end cap with the Apple logo by simply pulling it off.

    Adicionar comentário

    • Unscrew the 3 (3.55 mm) screws surrounding the black casing near the camera-lens.

    Adicionar comentário

    • Using tweezers, remove the netting that surrounds the black casing.

    Adicionar comentário

    • Pry open the top of the black casing and pull it off.

      • There is slot on each side just below the power cord connector.

    Adicionar comentário

    • Unscrew 2 (4.41 mm) screws seen in the picture that surround the attachment of the lens to the main body.

    Adicionar comentário

    • ,Pull the loose circuit strip from its connection using tweezers.

    • Do this for the side connection as well. This enables the entire camera lens section to come off.

    • Pull the camera lens section off the main body.

    Adicionar comentário

    • Unscrew the final (4.41 mm) screw that connects the lens circuitry to the aperture.

    • Then pull off the circuitry top section.

    Adicionar comentário

    • Pull off the top piece of the lens aperture.

    • Finally, remove the privacy lens using tweezers.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Cullen Shorey

Member since: 21-03-2018

157 reputação

Autoria de 1 guia

Equipe

IUPUI, Team S5-G1, Baechle Spring 2018 Membro de IUPUI, Team S5-G1, Baechle Spring 2018

IUPUI-BAECHLE-S18S5G1

3 Membros

3 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 4

Últimos 7 dias: 6

Últimos 30 dias: 17

Todo: 97