Ir para o conteúdo principal

Apple Wireless Keyboard Logic Board Replacement

O que você precisa

  1. Apple Wireless Keyboard Logic Board Replacement, Logic Board: passo 1, imagem 1 %32 Apple Wireless Keyboard Logic Board Replacement, Logic Board: passo 1, imagem 2 %32
    • Insert a metal spudger to open the plastic part under the Keyboard

  2. Apple Wireless Keyboard Logic Board Replacement: passo 2, imagem 1 %32
    • Remove the screw

  3. Apple Wireless Keyboard Logic Board Replacement: passo 3, imagem 1 %32 Apple Wireless Keyboard Logic Board Replacement: passo 3, imagem 2 %32 Apple Wireless Keyboard Logic Board Replacement: passo 3, imagem 3 %32
    • Pull the lock up and disconnect the connection cable

  4. Apple Wireless Keyboard Logic Board Replacement: passo 4, imagem 1 %32
    • Keeping the connection cable, push out the logic board's placement

  5. Apple Wireless Keyboard Logic Board Replacement: passo 5, imagem 1 %32
    • Unlock the latch of the logic board

  6. Apple Wireless Keyboard Logic Board Replacement: passo 6, imagem 1 %32
    • Remove the logic board from the placement

Conclusão

To reassemble your device, follow these instructions in reverse order.

20 outras pessoas executaram este guia.

Nicola

Membro desde: 11/14/13

638 Reputação

Autoria de 1 guia

9 comentários

Hi, anyone know where its possible to buy this logic board? My bluetooth chip is apparently broken

steve - Responder

Which model of keyboard is this, because my A1255 doesn't disassemble like this - the battery terminal is solidly restrained inside the tube by means of a metal expansion ring. Doesn't seem user repairable :(

gordon jackson - Responder

My power button was stuck. The shell was dented. This was an easier way to access and remove the button so I was able to file the inside of the tube smooth so the button would move freely.

Tony - Responder

I have disassembled my keyboard as shown above, but now I need a replacement Wireless Keyboard Logic Board. I have not been able to find one. Any suggestions?

Martin Rubio - Responder

Very nice! in my case the flat cable was not properly connecting. I only found out when i opened the cap to the logic board and saw the cable sitting slanted in its connector. Put it back straight and now it works again. Cheers!!

mollymol - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 4

Últimos 7 dias: 22

Últimos 30 dias: 100

Duração total: 48,241