Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Introdução

Removing the logic board is a very simple procedure. Hopefully you never have to do this to your Apple TV. Just a note... There is nothing wrong with my Apple TV. I made this guide for those that may need to use it one day. My Apple TV is still running well

Peças

Nenhum componente especificado.

  1. Use a spudger to pry the bottom cover off the Apple TV. It may be necessary to use two spudgers (one to hold it open while you pry with the other one)
    • Use a spudger to pry the bottom cover off the Apple TV.

    • It may be necessary to use two spudgers (one to hold it open while you pry with the other one)

  2. Carefully remove the bottom cover from the unit
    • Carefully remove the bottom cover from the unit

  3. Remove the pink thermal pad. (I already removed mine) Remove the five philips #1 screws securing the heatsink and logic board to the upper casing.
    • Remove the pink thermal pad. (I already removed mine)

    • Remove the five philips #1 screws securing the heatsink and logic board to the upper casing.

  4. Kits para o Nintendo Switch

    Um reparo rápido para reiniciar o jogo

    Confira kits para o Nintendo Switch

    Kits para o Nintendo Switch

    Um reparo rápido para reiniciar o jogo

    Confira kits para o Nintendo Switch
  5. Using a screwdriver (flathead) or a spudger, pull the power cable out of the logic board Now with a spudger or flathead screw driver, CAREFULLY remove the LED connector. Do this very carefully as this connector is extreme fragile, and easily damaged.
    • Using a screwdriver (flathead) or a spudger, pull the power cable out of the logic board

    • Now with a spudger or flathead screw driver, CAREFULLY remove the LED connector. Do this very carefully as this connector is extreme fragile, and easily damaged.

  6. Use a flathead screwdriver or spudger to tilit the logic board to an angle so you can grab it with your hands Holding the logic board by it edges, lift it up slightly. And remove
    • Use a flathead screwdriver or spudger to tilit the logic board to an angle so you can grab it with your hands

    • Holding the logic board by it edges, lift it up slightly.

    • And remove

    • Thats all. The logic board has been removed. Just follow the steps (Step 1-5 in reverse to install the board)

  7. The chip with the grease on is the Apple A4 chip. The thermal pad took the silkscreen off, so its hard to read. The The black ball surrounded by meta is the IR Remote sensor. In the third picture, the power connector and LED status connector are shown.
    • The chip with the grease on is the Apple A4 chip. The thermal pad took the silkscreen off, so its hard to read.

    • The The black ball surrounded by meta is the IR Remote sensor.

    • In the third picture, the power connector and LED status connector are shown.

  8. HDMI Port Micro USB Port (used for diagnostics, and service)
    • HDMI Port

    • Micro USB Port (used for diagnostics, and service)

    • Digital TOS Link out (Optical Out)

    • Gigabit Ethernet

    • The second picture shows the thermal pads (pinkish white edge stuff) this keeps the components of the logic board cool and happy.

Conclusão

To reassemble your device, follow these instructions in reverse order.

7 outras pessoas concluíram este guia.

Nicholas Ouimet

Membro desde: 16/10/2009

2.210 Reputação

8 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 13

Duração total: 12,150