Introdução

This repair will need:

A T8 Torx screwdriver.

Peças

Não são necessárias peças.

  1. After completing the initial disassembly, you may proceed to hard drive replacement.
    • After completing the initial disassembly, you may proceed to hard drive replacement.

    After completing the initial disassembly, you may proceed to hard drive replacement.

    Aubrey - Responder

  2. First, you will need to remove the five T8 torx screws that mount the hard drive to the internal frame.
    • First, you will need to remove the five T8 torx screws that mount the hard drive to the internal frame.

    • Next, you will remove the mounting frame and the plastic shield.

    First, you will need to remove the five T8 torx screws that mount the hard drive to the internal frame.

    Aubrey - Responder

    Next, you will remove the mounting frame and the plastic shield.

    Aubrey - Responder

    • You can use a spudger (tool shown in photo) to remove the ribbon cable from the hard drive.

    You can use a spudger (tool shown in photo) to remove the ribbon cable from the hard drive.

    Aubrey - Responder

    • Carefully, pry the ribbon away from the pins.

    Carefully, pry the ribbon away from the pins.

    Aubrey - Responder

    • Attach the ribbon cable to the new hard drive and follow steps 1-3, in reverse, to complete the installation.

    Attach the ribbon cable to the new hard drive and follow steps 1-3, in reverse, to complete the installation.

    Aubrey - Responder

Conclusão

To reassemble your device, follow these instructions in reverse order.

4 outras pessoas concluíram este guia.

Tyler

Member since: 10-04-2011

132 reputação

2 Guides authored

Equipe

Cal Poly, Team 20-66, Walters Spring 2011 Membro de Cal Poly, Team 20-66, Walters Spring 2011

CPSU-WALTERS-S11S20G66

4 Membros

3 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 16

Todo: 3,693