Conserte seus objetos Comunidade Loja

Amazon Echo Dot 3rd Generation Speaker Replacement

Introdução

If the speaker of your Amazon Echo Dot 3rd Generation sounds muffled or is distorted in any way, the speaker may need to be replaced. Follow this guide to do so.

The cone shape of your Echo Dot allows your speaker to transmit Alexa's voice in an echo that should ideally carry through the room your device is in.

Check the speaker for other potential causes of sound disruption. Potential causes may include the mesh surrounding your Echo Dot being clouded with debris. Your Echo Dot could also be too close to another device such as a microwave that will cause interference.

Before attempting, make sure the Echo Dot is turned off and unplugged from the external power source.

O que você precisa

  1. Amazon Echo Dot 3rd Generation Speaker Replacement, Casing: passo 1, imagem 1 %32 Amazon Echo Dot 3rd Generation Speaker Replacement, Casing: passo 1, imagem 2 %32 Amazon Echo Dot 3rd Generation Speaker Replacement, Casing: passo 1, imagem 3 %32

    • Turn the Echo Dot over so the barcode is facing up, giving you access to the bottom of the device.

    Editar

  2. Amazon Echo Dot 3rd Generation Speaker Replacement: passo 2, imagem 1 %32 Amazon Echo Dot 3rd Generation Speaker Replacement: passo 2, imagem 2 %32

    • Use a spudger to gently lift the adhesive covering between the casing and the device.

    Editar

  4. Amazon Echo Dot 3rd Generation Speaker Replacement: passo 3, imagem 1 %32

    • Use a T6 Torx screwdriver to remove the four 7.2 mm screws located around the corners of the device.

    • Make sure to keep the screws in a safe place for the reassembly process.

    Editar

  5. Amazon Echo Dot 3rd Generation Speaker Replacement: passo 4, imagem 1 %32 Amazon Echo Dot 3rd Generation Speaker Replacement: passo 4, imagem 2 %32

    • Gently lift the casing of the device, starting from one side.

    • If the casing is stuck, use the spudger to carefully loosen it along the edges.

    • Be careful not to damage any internal components of the device.

    Editar

  6. Amazon Echo Dot 3rd Generation Speaker Replacement, Speaker: passo 5, imagem 1 %32

    • Remove the four black 8.4 mm screws surrounding the speaker using a JIS #1 screwdriver.

    Editar

  7. Amazon Echo Dot 3rd Generation Speaker Replacement: passo 6, imagem 1 %32 Amazon Echo Dot 3rd Generation Speaker Replacement: passo 6, imagem 2 %32 Amazon Echo Dot 3rd Generation Speaker Replacement: passo 6, imagem 3 %32

    • Use a spudger to pry the speaker out of the device.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

10 outras pessoas executaram este guia.

14Comentários do guia

Now where do I get the new speaker?

Philip Terry - Responder

Now WHERE do I get the new speaker?

vinodhkumar chejarla - Responder

WHERE DO WE GET THE REPLACEMENT speaker!?

Jerry Perry - Responder

I'm not sure if this is gonna work, but I have found a speaker on Amazon which is of the same size, almost the same wattage and same impedance. I'm only not sure about the depth of the speaker.

here is the link: https://amzn.in/d/5CvwhrW

I hope this helped!

Shri Mohan YV -

If you have a new one and the bass is a bit rattly just losten the speaker screws push lightly on the speaker whilst tightening the screws back up. It reduces the pressure and keeps the driver from hitting the case or moving to far out

GrantersG - Responder

Comentar

Visualizações:

Últimas 24 horas: 19

Últimos 7 dias: 103

Últimos 30 dias: 423

Ao todo: 8,616