Ir para o conteúdo principal

Altec Lansing Mini Lifejacket 2 Motherboard Replacement

O que você precisa

  1. Altec Lansing Mini Lifejacket 2 Motherboard Replacement, Back Panel: passo 1, imagem 1 %32 Altec Lansing Mini Lifejacket 2 Motherboard Replacement, Back Panel: passo 1, imagem 2 %32 Altec Lansing Mini Lifejacket 2 Motherboard Replacement, Back Panel: passo 1, imagem 3 %32
    • Use the spudger to remove the eight black pins from the front and back of the wire screens.

  2. Altec Lansing Mini Lifejacket 2 Motherboard Replacement: passo 2, imagem 1 %32 Altec Lansing Mini Lifejacket 2 Motherboard Replacement: passo 2, imagem 2 %32 Altec Lansing Mini Lifejacket 2 Motherboard Replacement: passo 2, imagem 3 %32
    • Detach the eight secondary pins from the front and back of the wire mesh plates with a spudger.

    • Removing the secondary pins from the rubber casing is optional.

  3. Altec Lansing Mini Lifejacket 2 Motherboard Replacement: passo 3, imagem 1 %32 Altec Lansing Mini Lifejacket 2 Motherboard Replacement: passo 3, imagem 2 %32
    • Remove both black and orange layers from the speaker body.

  4. Altec Lansing Mini Lifejacket 2 Motherboard Replacement: passo 4, imagem 1 %32 Altec Lansing Mini Lifejacket 2 Motherboard Replacement: passo 4, imagem 2 %32 Altec Lansing Mini Lifejacket 2 Motherboard Replacement: passo 4, imagem 3 %32
    • Remove the single 7.8mm Phillips #2 screw from the mounting plate located under the device.

    • Slide the mounting plate out to remove it.

  5. Altec Lansing Mini Lifejacket 2 Motherboard Replacement: passo 5, imagem 1 %32 Altec Lansing Mini Lifejacket 2 Motherboard Replacement: passo 5, imagem 2 %32
    • Pry off the wire mesh on both sides using a metal spudger.

    • Be gentle to avoid bending the mesh.

  6. Altec Lansing Mini Lifejacket 2 Motherboard Replacement: passo 6, imagem 1 %32 Altec Lansing Mini Lifejacket 2 Motherboard Replacement: passo 6, imagem 2 %32
    • Using tweezers, remove the four rubber stoppers in each corner of the rear panel.

  7. Altec Lansing Mini Lifejacket 2 Motherboard Replacement: passo 7, imagem 1 %32
    • Remove the four 13.7mm Phillips #1 screws located underneath the rubber stoppers.

  8. Altec Lansing Mini Lifejacket 2 Motherboard Replacement: passo 8, imagem 1 %32
    • Pull the case apart to access the interior components.

  9. Altec Lansing Mini Lifejacket 2 Motherboard Replacement: passo 9, imagem 1 %32 Altec Lansing Mini Lifejacket 2 Motherboard Replacement: passo 9, imagem 2 %32 Altec Lansing Mini Lifejacket 2 Motherboard Replacement: passo 9, imagem 3 %32
    • To remove the back panel, gently pull out its wire harness.

  10. Altec Lansing Mini Lifejacket 2 Motherboard Replacement, Battery: passo 10, imagem 1 %32 Altec Lansing Mini Lifejacket 2 Motherboard Replacement, Battery: passo 10, imagem 2 %32 Altec Lansing Mini Lifejacket 2 Motherboard Replacement, Battery: passo 10, imagem 3 %32
    • Disconnect the battery from the motherboard.

    • The battery is not secured within the case and can be removed after detaching its wiring from the circuit board.

  11. Altec Lansing Mini Lifejacket 2 Motherboard Replacement, Motherboard: passo 11, imagem 1 %32 Altec Lansing Mini Lifejacket 2 Motherboard Replacement, Motherboard: passo 11, imagem 2 %32 Altec Lansing Mini Lifejacket 2 Motherboard Replacement, Motherboard: passo 11, imagem 3 %32
    • Unplug the remaining four wire harnesses attached to the circuit board

  12. Altec Lansing Mini Lifejacket 2 Motherboard Replacement: passo 12, imagem 1 %32 Altec Lansing Mini Lifejacket 2 Motherboard Replacement: passo 12, imagem 2 %32
    • Remove the three 9.1mm Phillips #1 screws located on the circuit board.

  13. Altec Lansing Mini Lifejacket 2 Motherboard Replacement: passo 13, imagem 1 %32 Altec Lansing Mini Lifejacket 2 Motherboard Replacement: passo 13, imagem 2 %32 Altec Lansing Mini Lifejacket 2 Motherboard Replacement: passo 13, imagem 3 %32
    • Remove the motherboard.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Stephen Albrecht

Membro desde: 02/14/18

1.008 Reputação

Autoria de 4 guias

Equipe

USF Tampa, Team S3-G2, Nance Spring 2018 Membro de USF Tampa, Team S3-G2, Nance Spring 2018

USFT-NANCE-S18S3G2

Membros da 4

Autoria de 4 guias

6 comentários

I own the IMW778-BLU-TA model. Where can I find a replacement motherboard for it??

Nick Cote - Responder

same for me, anyone knows where can I find a replacement of the motherboard? thx

Travis - Responder

need back panel replacement

rahul pande - Responder

Same here! Loved the product. Can not afford to buy something else.

Mr Shopper - Responder

I need 2 the board for charging,usb,aux cord that plugs into motherboard.

John Proffit - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 9

Últimos 30 dias: 17

Duração total: 5,346