Ir para o conteúdo principal

Altec Lansing BoomJacket 2 Disassembly

O que você precisa

  1. Altec Lansing BoomJacket 2 Disassembly, Altec Lansing BoomJacket 2 Disassembly: passo 1, imagem 1 %32 Altec Lansing BoomJacket 2 Disassembly, Altec Lansing BoomJacket 2 Disassembly: passo 1, imagem 2 %32
    • Starting from any side, use your fingers to grab the black rubber sleeve and gently pull away from the speaker on both sides.

  2. Altec Lansing BoomJacket 2 Disassembly: passo 2, imagem 1 %32 Altec Lansing BoomJacket 2 Disassembly: passo 2, imagem 2 %32
    • Using your fingers, grab the blue sleeve from one side and pull away from the unit.

  3. Altec Lansing BoomJacket 2 Disassembly: passo 3, imagem 1 %32
    • At each of the marked pry spots, use the metal spudger to lift the speaker grill away from the case.

    • Avoid using excessive force to prevent bending the grill.

  4. Altec Lansing BoomJacket 2 Disassembly: passo 4, imagem 1 %32 Altec Lansing BoomJacket 2 Disassembly: passo 4, imagem 2 %32
    • Use the tweezers to remove the six rubber stoppers. There are four in the middle and two on the sides.

  5. Altec Lansing BoomJacket 2 Disassembly: passo 5, imagem 1 %32
    • Use the PH1 Phillips screwdriver to remove the six 12mm screws that lie underneath each rubber stopper.

  6. Altec Lansing BoomJacket 2 Disassembly: passo 6, imagem 1 %32
    • Gently pull apart the front panel from the base of the speaker.

Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas executaram este guia.

Zach Braaten

Membro desde: 07/12/18

516 Reputação

Autoria de 4 guias

Equipe

UW Tacoma, Team S1-G4, Cardinal Summer 2018 Membro de UW Tacoma, Team S1-G4, Cardinal Summer 2018

UWT-CARDINAL-SU18S1G4

Membros da 4

Autoria de 4 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 9

Últimos 30 dias: 15

Duração total: 1,500