Introdução

This guide demonstrates how to remove the keyboard from an Alienware M18x Laptop.

Peças

Não são necessárias peças.

  1. Turn the computer over.
    • Turn the computer over.

    • Slide the battery latch over and lift the battery out.

    Adicionar comentário

  2. Unscrew the four indicated screws with a J000 screwdriver.
    • Unscrew the four indicated screws with a J000 screwdriver.

    Adicionar comentário

    • Use the plastic pryer tool to lift the bottom cover off.

    Adicionar comentário

    • Remove the two indicated screws with the J000 screwdriver.

    Adicionar comentário

    • Turn the laptop right-side up, and open the laptop.

    • Use the plastic pryer tool to loosen the flat piece surrounding the keys by gently prying it upwards from the laptop's base.

    • Make sure to go around the entire perimeter of the piece to loosen all areas of it.

    Adicionar comentário

  3. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
    • The piece is now free from its fastenings to the base of the laptop, and can be lifted off.

    • This piece is still connected to the laptop via power cable. Be sure not to lift it off too far or with too much force, as doing so could potentially rip or damage the cables.

    Adicionar comentário

    • Gently remove the power cable with your hands or with the help of a prying tool.

    Adicionar comentário

    • The keyboard's fastening screws are now exposed and can be removed with a J000 screwdriver.

    Adicionar comentário

    • As before, the keyboard is now unfastened but still connected to the base via cables.

    • Flip the keyboard over towards the edge of the laptop to expose the locations of the connectors. Avoid tugging on the cables when you do this.

    Adicionar comentário

    • Locate and remove the first connector cable.

    • Use a prying tool to assist in unplugging the cable.

    Adicionar comentário

    • Locate and remove the second connector cable.

    • Again, use a prying tool to help remove.

    Adicionar comentário

    • The left section of the keyboard is connected by a single screw and two connector cables.

    • Remove the screw with a J000 screwdriver.

    • Remove the connecting cables with a prying bar.

    Adicionar comentário

    • All sections of the keyboard are now free to be taken off and replaced!

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Jonathan Panella

Member since: 21-02-2018

411 reputação

2 Guides authored

Equipe

Cal Poly, Team S21-G1, Banghart Winter 2018 Membro de Cal Poly, Team S21-G1, Banghart Winter 2018

CPSU-BANGHART-W18S21G1

4 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 26

Todo: 139