Pular para o conteúdo principal

Introdução

Upgrade your hard drive for more storage space.

  1. First, take off the battery by moving the latch to the left and pulling it up.
    • First, take off the battery by moving the latch to the left and pulling it up.

  2. Then unscrew the two Phillips screws. Pull the cover down, then up, revealing the internals Pull the cover down, then up, revealing the internals
    • Then unscrew the two Phillips screws.

    • Pull the cover down, then up, revealing the internals

  3. Unscrew the four screws indicated Pull on the tab that says "Pull" and remove the Hard Drive
    • Unscrew the four screws indicated

    • Pull on the tab that says "Pull" and remove the Hard Drive

  4. With even pressure on both sides, take off the SATA converter and then connect it to the drive you would like to replace it with. With even pressure on both sides, take off the SATA converter and then connect it to the drive you would like to replace it with.
    • With even pressure on both sides, take off the SATA converter and then connect it to the drive you would like to replace it with.

Conclusão

To reassemble your device, follow these instructions in reverse order.

7 outras pessoas concluíram este guia.

Gabe

Membro desde: 09-04-2010

8.122 reputação

3 Guias de autoria

Equipe

Master Techs Membro de Master Techs

Community

288 Membros

821 Guias de autoria

Thanks, great guide. Was a bit confused between steps three and four but I simply had to remove the metal casing around the hard drive.

Hasan - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 3

Últimos 7 dias: 3

Últimos 30 dias: 37

Todo: 31,456