Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Introdução

How to remove and replace Coin-Cell Battery

Peças

Nenhum componente especificado.

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer.

    • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

    • Turn the computer over.

  2. Loosen the eight captive screws that secure the base cover to the computer base.
    • Loosen the eight captive screws that secure the base cover to the computer base.

  3. Lift the base cover off the computer base.
    • Lift the base cover off the computer base.

  4. Kits para o Nintendo Switch

    Um reparo rápido para reiniciar o jogo

    Confira kits para o Nintendo Switch

    Kits para o Nintendo Switch

    Um reparo rápido para reiniciar o jogo

    Confira kits para o Nintendo Switch
  5. Align the tabs on the NEW base cover with the slots on the computer base and place the base cover in position.
    • Align the tabs on the NEW base cover with the slots on the computer base and place the base cover in position.

  6. Tighten the eight screws that secure the base cover to the computer base.
    • Tighten the eight screws that secure the base cover to the computer base.

  7. WARNING: Before working inside your computer, read the safety information that shipped with your computer.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer.

    • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

    • Disconnect the coin-cell battery cable from the connector on the system board.

  8. The coin-cell battery is glued to the system board. Using a plastic scribe, pry the coin-cell battery from the system board.
    • The coin-cell battery is glued to the system board. Using a plastic scribe, pry the coin-cell battery from the system board.

  9. Use the adhesive on NEW the coin-cell battery and adhere it to the system board.
    • Use the adhesive on NEW the coin-cell battery and adhere it to the system board.

  10. Connect the coin-cell battery cable to the connector on the system board.
    • Connect the coin-cell battery cable to the connector on the system board.

Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas concluíram este guia.

darrius

Membro desde: 26/03/2018

5.072 Reputação

30 Guias de autoria

Equipe

Informative Technologies Inc. Membro de Informative Technologies Inc.

Community

21 Membros

1.816 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Duração total: 125