Pular para o conteúdo principal

Introdução

This guide will show you how to replace your Alcatel Pop 4 Plus speaker. This guide involves removing the back cover and the secondary cover where the speaker is located. Then you just pop it out and put in the new speaker.

  1. Remove the back cover by sliding your fingernail in the grove around the edge of the phone and prying it off. Remove the back cover by sliding your fingernail in the grove around the edge of the phone and prying it off.
    • Remove the back cover by sliding your fingernail in the grove around the edge of the phone and prying it off.

  2. Remove seventeen 3mm Phillips #000 screws from the mid-frame. Remove seventeen 3mm Phillips #000 screws from the mid-frame.
    • Remove seventeen 3mm Phillips #000 screws from the mid-frame.

  3. kits de reparo de baterias de iPhone

    Only $29.99

    Buy Now

    kits de reparo de baterias de iPhone

    Only $29.99

    Buy Now
  4. Use the flat end of the spudger, or your fingernail, to pry off the mid-frame.
    • Use the flat end of the spudger, or your fingernail, to pry off the mid-frame.

  5. Use the flat end of the spudger disconnect the battery from the motherboard. Use the flat end of the spudger tool to pry out the battery.
    • Use the flat end of the spudger disconnect the battery from the motherboard.

    • Use the flat end of the spudger tool to pry out the battery.

  6. Use a spudger to pry the speaker from the mid-frame. Use a spudger to pry the speaker from the mid-frame.
    • Use a spudger to pry the speaker from the mid-frame.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Maalik Poleon

Membro desde: 25-01-2018

196 reputação

2 Guias de autoria

Equipe

USF Tampa, Team S20-G6, Passmore Spring 2018 Membro de USF Tampa, Team S20-G6, Passmore Spring 2018

USFT-PASSMORE-S18S20G6

4 Membros

6 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 8

Todo: 113