Ir para o conteúdo principal

Aiptek Pocket DVII 1.3M LCD Display Screen Replacement

O que você precisa

  1. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement, Display Screen: passo 1, imagem 1 %32 Aiptek Pocket DVII 1.3M LCD Display Screen Replacement, Display Screen: passo 1, imagem 2 %32 Aiptek Pocket DVII 1.3M LCD Display Screen Replacement, Display Screen: passo 1, imagem 3 %32
    • Remove the battery cover.

    • Remove the batteries.

  2. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: passo 2, imagem 1 %32 Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: passo 2, imagem 2 %32
    • Remove the sticky black dots.

    • Remove the three black 4mm screws from the flip screen. Use a Phillips head screw driver.

  3. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: passo 3, imagem 1 %32
    • Using an opening tool, separate the cover from the screen.

    • The cover won't completely come off. This will happen in the next step.

    • Don't be afraid to use a little more force.

  4. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: passo 4, imagem 1 %32
    • Using an opening tool remove the outside cover of the flip screen.

    • Move the cover towards the lens and then away from the screen.

  5. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: passo 5, imagem 1 %32 Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: passo 5, imagem 2 %32
    • With the cover off, push the brown locking mechanism up, so the picture cable can be remove.

    • You only need to unplug the bottom cable in the picture.

  6. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: passo 6, imagem 1 %32
    • Remove the two black screws from the circuit board.

  7. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: passo 7, imagem 1 %32
    • With the opening tool, pop up the screen assembly.

    • The screen is glued to the black cover. Use more force if needed.

  8. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: passo 8, imagem 1 %32
    • As in step 5, push up the brown locking mechanism of the remaining cable.

    • Unplug the picture cable.

  9. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: passo 9, imagem 1 %32
    • Turn the circuit board over and with a soldering gun remove the two wires on each end.

    • Use a screwdriver to pull the loosened wire away.

  10. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: passo 10, imagem 1 %32
    • With the wires no longer holding the circuit board and screen together, remove and replace the broken screen.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Equipe

USF Tampa, Team 6-4, Brown Winter 2015 Membro de USF Tampa, Team 6-4, Brown Winter 2015

USFT-BROWN-W15S6G4

Membros da 3

Autoria de 10 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 2

Duração total: 343