Conserte seus objetos Comunidade Loja

Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement

O que você precisa

  1. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement, Memory Ejecting Assembly: passo 1, imagem 1 %32 Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement, Memory Ejecting Assembly: passo 1, imagem 2 %32 Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement, Memory Ejecting Assembly: passo 1, imagem 3 %32

    • Remove the battery cover.

    • Remove the batteries.

    Editar

  2. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: passo 2, imagem 1 %32

    • Unscrew the three 4mm screws from the battery side of the device. Use a Phillips screw driver.

    Editar

  3. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: passo 3, imagem 1 %32

    • Remove the four screws from the back side.

    Editar

  4. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: passo 4, imagem 1 %32 Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: passo 4, imagem 2 %32

    • Remove the sticky black dot.

    • Remove the hidden screw.

    Editar

  5. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: passo 5, imagem 1 %32 Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: passo 5, imagem 2 %32

    • Remove the two screws from the top side of the device.

    • Remove the two screws from the bottom side of the device.

    Editar

  7. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: passo 6, imagem 1 %32

    • Remove the rear cover.

    • Be careful not to lose the spring inside.

    Editar

  8. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: passo 7, imagem 1 %32

    • Pull back the front cover so that you can dislodge the side cover.

    Editar

  9. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: passo 8, imagem 1 %32

    • Unfold the device and be careful not to tear the black and red power supply wires.

    Editar

  10. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: passo 9, imagem 1 %32

    • Remove the four screws from the motherboard.

    Editar

  11. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: passo 10, imagem 1 %32

    • Take out the motherboard while disconnecting the flip screen's cable from underneath.

    Editar

  12. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: passo 11, imagem 1 %32

    • Remove the side cover.

    • Flip the device and locate the ejecting assembly.

    Editar

  13. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: passo 12, imagem 1 %32

    • Remove the grey button.

    Editar

  14. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: passo 13, imagem 1 %32

    • Push the metal arm the button was on all the way up.

    Editar

  15. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: passo 14, imagem 1 %32 Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: passo 14, imagem 2 %32

    • Pop the main metal arm out of the other metal arm's socket.

    • Position the arm vertically like in the first picture. The arm should come off easily.

    • Replace the ejecting arm.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Autor(a)

com 1 outro contribuidor

Gyozo Aba Hivatal

Membro desde: 01/21/15

561 Reputação

Autoria de 5 guias

Emblemas: 14

+11 outros emblemas

Equipe

USF Tampa, Team 6-4, Brown Winter 2015 Membro de USF Tampa, Team 6-4, Brown Winter 2015

USFT-BROWN-W15S6G4

Membros da 3

Autoria de 10 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Duração total: 109