Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Introdução

Tablet motherboard's can wear out and sometimes they need to be replaced. This guide walks you through the necessary steps to replace it effectively. The motherboard embedded into this device requires specific tools and techniques to remove and replace it.

    • Reminder: Turn off device before you start opening your tablet.

  1. Begin at any side of the tablet.
    • Begin at any side of the tablet.

    • With a plastic opening tool, begin taking apart the back cover from the tablet by working along the edges.

    • Use caution when prying the lid open to avoid damaging your tablet.

  2. Using a plastic opening tool, separate the back cover from the main device
    • Using a plastic opening tool, separate the back cover from the main device

    • Open each side continuously to ensure all sides have been separated,

  3. Telas LCD de reposição iPhone (com ferramentas)

    A opção econômica, coberta por nossa garantia vitalícia.

    Confira os kits

    Telas LCD de reposição iPhone (com ferramentas)

    Reduza os custos de reparo, não a qualidade.

    Confira os kits
  4. Turn tablet over.
    • Turn tablet over.

    • Lay the tablet on a flat surface with the screen facing down. Locate the copper cover along the outside of the tablet.

  5. Carefully peel back the copper foil to reveal the motherboard.
    • Carefully peel back the copper foil to reveal the motherboard.

  6. Peel tape back to expose connections.
    • Peel tape back to expose connections.

  7. There are several sets of wires connected to the motherboard as shown in the images.  Carefully disconnect each set of wires. There are several sets of wires connected to the motherboard as shown in the images.  Carefully disconnect each set of wires.
    • There are several sets of wires connected to the motherboard as shown in the images. Carefully disconnect each set of wires.

  8. Use a JIS screw bit #00 to remove screws around the motherboard using the provided image to locate each screw. Use a JIS screw bit #00 to remove screws around the motherboard using the provided image to locate each screw.
    • Use a JIS screw bit #00 to remove screws around the motherboard using the provided image to locate each screw.

  9. Gently pull out motherboard.
    • Gently pull out motherboard.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Michael

Membro desde: 03-09-2015

513 Reputação

4 Guias de autoria

equipe

USF Tampa, Team 8-5, Eyestone Fall 2015 Membro de USF Tampa, Team 8-5, Eyestone Fall 2015

USFT-EYESTONE-F15S8G5

3 Membros

5 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 5

Últimos 30 dias: 17

Duração total: 2,085