Peças

Não são necessárias peças.

Make sure the laptop is turned off and unplugged before starting.
  • Make sure the laptop is turned off and unplugged before starting.

  • Unscrew the thirteen 10mm screws on the back of the computer using the Phillips #0 screwdriver.

  • Using the spudger or other prying tool, gently pry the back off of the device.

  • Be sure not to pry too hard as it may result in snapping the back plate.

Adicionar comentário

Unscrew the two 5mm battery screws using the Phillips #0 screwdriver.
  • Unscrew the two 5mm battery screws using the Phillips #0 screwdriver.

Adicionar comentário

  • Gently lift the battery up and away from the hooks on the bottom of the device keeping the battery in place.

  • Be sure the battery is away from the clips before pulling away so as not to break the clips.

Adicionar comentário

  • Detach the connecting cable from the motherboard by pulling away.

  • Remove the battery from the device.

Adicionar comentário

  • Unscrew the two screws on the silver restraint with the Phillips #0 screwdriver.

  • Lift the silver restraint from the device.

Adicionar comentário

  • Unscrew the five screws on the touchpad.

  • You will need to move aside the plastic covering that is above each screw.

Adicionar comentário

  • Using a spudger, lift the black electrical tape to the left of the touchpad.

  • Remove the black wire running across the touchpad from the two hooks on top of the part.

  • Be careful not to damage the black wire when removing from the two hooks.

Adicionar comentário

  • Lift the flap on the wire connecting the motherboard and remove the connector.

Adicionar comentário

  • Remove the touchpad from the device.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Jacob Kahn

Member since: 17-10-2017

225 reputação

2 Guides authored

Equipe

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 4

Todo: 53